Tripod
€74.40 – €93.00
**Please note**: The SS Matte and SS Ice Matte Tripods currently in stock are kindly provided by our German distro Intrade Concepts GmbH.
The Tripod is Atmizone’s latest approach to 22mm RTA design for single coil setups. It offers an unparalleled vaping experience focusing on performance, versatility and ergonomics.
Apart from its great potential out of the box, you can tune your Tripod to fit your exact needs by choosing from a list of great accessories, like the Restricted Chimney, the Fixed Air Flow Tubes Kit, the 3.4ml Extension Kit or the Long Top Drip Tip.
The Tripod is Atmizone’s approach to 22mm RTA design for single coil setups. It
offers an unparalleled vaping experience focusing on performance, versatility and
ergonomics. With its enhanced flavor and vapor production, potential for variable specs,
instant real time access to deck, instant top refill system, easy rebuilding and attention
to details, the Tripod is one step ahead of most RTAs out there .
Apart from its great potential out of the box, you can tune your Tripod to fit your exact needs by choosing from a list of great accessories, like the Restricted Chimney, the Fixed Air Flow Tubes Kit, the 3.4ml Extension Kit or the Long Top Drip Tip. Also, all Tripod parts are available for support and maintenance purposes here.
Check out the features tab for some really interesting details about it.
Features
Tripod aesthetic features / versions
The Tripod is available in the following versions:
Stainless Steel Matte (SS Matte)
SS Matte is a light-brushed matte / satin finish, close to the natural appearance of CNC processed Stainless Steel.
Stainless Steel Ice Matte (SS Ice Matte)
SS Ice Matte is a medium blasted finish with special SS beams, darker (more dull) and more greyish compared to SS matte. The SS Ice Matte is a dynamic finish. It is not always the same and it gets darker over time. Also more prone to scratches compared to SS Matte.
Stainless Steel DLC Carbon Black (SS Carbon Black)
SS Carbon Black is a DLC treated dark shade of black, typical of carbon (coal) and closer to darker black shades. We have enhanced the dark matte result with the application of sandblasting on all outer surfaces prior to the DLC treatment. Treated are the AFC Ring, the Chimney, the Seal and the Top Cap.
Please note:
Due to the nature of Diamond-Like Carbon treatment, it is expected to find small marks and iridescence effect on certain points of the treated parts’ inner surfaces. Steps of the procedure ensure that outer surfaces of the device have uniform looks and finish, but inner surfaces can’t be processed equally effectively.
As an attribute of DLC treatment, slight tonic differences are expected in the same color between batches. Differences are not visible with bare eyes. For this, we keep stock of parts from different batches separately, in order to make sure that replacements will come from the same batch with the device when needed.
More about the DLC procedure on the Tripod here.
More about maintenance and cleaning in the Precautions section of the Tripod manual, as well as our support section.
Tripod functional features
The Deck
The deck of the Tripod is targeted for single coil setups with design details aiming to facilitate and improve rebuilding process as much as possible. Focusing on some of them, you can see high precision large pan head phillips post screws, conveniently placed rails to capture wire either between rail and screw head / body or around screw body (depending on wire D), cut – outs on outer deck rim for easier rebuilding, cut – outs on inner deck rim plus cotton wells to help proper cotton placement and juice distribution along cotton body, sufficient liquid intake slots on deck sides ( approx. 4.0mm x 2.0mm). The Tripod deck can literally host any size of single coil build, from classic small sized ones up to larger exotic coils.
The Air Flow
You may tune air flow via four pin options, each one with air hole D=1.0mm/1.2mm/ 1.5mm/1.8mm pinned inside a D=4.0mm nest. You may also regulate more “airy” flow via the AFCS Ring, adjusting from zero to D=4.0mm.
The Adjustable Chamber and Chimney
With the Tripod, we introduce the Chamber and Chimney Reducer assembly. It consists of two parts, that are sandwiching the upper part of the Chimney. When assembled, the C&C Reducer forms a vaporization chamber with lower volume (approx. 5.3mm chamber height) and a chimney with 3.0mm inner diameter, focusing on flavour oriented setups rather than vapour production. When removed, the chamber offers approx. 9.0mm coiling height and the chimney gets approx. 5.3mm inner diameter, with proper geometry to get all the clouds you want. The C&C Reducer actually offers you the potential of two different chamber and chimney geometries, thus two different single coil RTAs.
The Drip Tip
Another interesting point is the custom drip tip that comes with the device. This is a two-parts assembly as well, with its two parts sandwiching the Top Cap to ensure extra stability when removing top cap to refill. The drip tip is easily removable to let you use your own 510 drip tip.
Increased Capacity
Add to the above an upcoming extended capacity kit (3.5ml from stock 2.0ml – only available outside the EU) and you will have a good idea of Tripod’s potential for versatility.
Optimised Ergonomics
We have based on the concept of a thread-less mechanism with twist and pull / push actions in order to design and manufacture high precision parts that make vaping with an RTA so much easier. Instant access to deck can’t get any simpler and quicker. You just twist, align the small triangles that are located on the sides of chimney and deck and then pull in order to access to your deck super quickly, any time, even with a full tank. Same with refilling, as good old screw on threaded cap is no longer here. Simply align triangle on side of the top cap with the dot on the rim right below and pull up to refill through the large liquid slots. Don’t need to worry if you find it hard to spot dots and triangles: If you twist and pull gently you will definitely get it when you reach to the aligned – unlocking point of each mechanism.
Specs
– Air flow tuning via 4 pin options with air hole D=1.0mm/1.2mm/ 1.5mm/1.8mm pinned inside a D=4.0mm nest or via an AFCS Ring adjusting from zero to D=4.0mm.
– M2.5mm pan head phillips post screws.
– Two parts screw-in custom Drip Tip / inner D=4.0mm, can also host any 510 drip tip.
– 10.0mm post-to-post space, ~6.6mm post-to-post net space , ~5.8mm coil space.
– Tank capacity 2ml.
– Max. net coiling height ~9.0mm (C & C Reducer out) / ~5.3mm (C & C Reducer in)
– Chimney top inner D ~5.2mm (C & C Reducer out) / ~3.0mm (C & C Reducer in)
– Height 510 excl., 39mm [Drip Tip off] / 47.0mm [Drip Tip on]
– Weight ~56g
– SS316 foodgrade metal parts, PEEK Thermoplastic Insulators, POM (Acetal) Drip Tip, Steel nickel plated Post Screws, Borosilicate Glass Tank
What's more...
Getting Started
Before using Tripod for the first time, it is strongly recommended that you take a good look at the support section , with tons of useful info about the Tripod, including detailed introduction, assembly/disassembly guides, useful tips etc.
What’s in the box
– 1 x Tripod RTA (1 x Chamber & Chimney Reducer pre-installed)
– 1 x Set of spares (2 x Post Screws, 1 x O-ring Kit, 1 x Tank Body, 1 x AF Pins Kit)
– 1 x User Guide
– 1 x Warranty Card
66 reviews for Tripod
Add a review
You must be logged in to post a review.
You may also like…
Tripod Parts
Tripod Parts
NVcarpenter –
I can’t find enough good words to say about this atimizor. Since receiving my Tripod I haven’t even touched my GT III or my Kayfuns! You guys hit a homerun with this one and your customer service is top notch. Thank You again to the people at Atmizoo, you have an amazing product and business practice to back it up.
Tasos –
Blushing, can’t thank you enough!
Just know we are right here to support should you need anything in the future 🙏✌️
vogt –
the atmizoo tripod is an amazing device. this is by no means a hasty report: i’ve been running it non stop since i received it – and that was 5 weeks ago from today — which by the way was the day after i had ordered it. it took only 27 hours for the tripod to travel from greece to austria into my hands.
i was using the atmizoo keras as my daily driver for the 2 years that preceeded it, so to best describe it i’m going to compare the two.
i was vaping more mtl-style before (although not super tight) but i like the more airy default flow of the tripod without the restriction inserts. i think the default with chamber reducer produces the best balance between air and taste. i have to admit i didn’t bother much with the more restricted setups. both the 3mm chamber reducer and 4mm setups i tried so far are great in their respective area, although i prefer the smaller chamber personally. my favorite is 0.66 ohm 28ga ss316l ø2.5 coil with chamber reducer.
in short: i am extremely happy with the device.
to elaborate a bit more:
the airflow is amazing.
the taste is perfect.
what i love most about the design of the tripod is probably the threadless refill & rebuild system.
building is extremely easy and convenient. the tripod has an almost gigantic building deck compared to the keras. no fiddling about, all is done in a few clean steps and it is a joy that you don’t have to empty the tank to rebuild.
there is no leakage (at least when you close the juice holes when you put it in your pocket 🙂 ). i did have some trouble in this regard with the keras in the inital phase as well. not so with the tripod.
no dry hits at all (if you don’t forget to open the juice holes after you took it out of your pocket 🙂 ). i loved the keras giga rev, but it took me a while to get the wicking right. no issues with the tripod at all.
what could probably be slightly improved is refilling in low light conditions: a more tactile marker (eg. little bumps) on the cap & tank on the right position could work wonders. however this can be remedied by pulling the cap slightly up and twisting the cap until you feel the ridge slide into the gap, which allows the cap to come off, so it is not a real issue.
the airflow control ring is a bit stiff – i can only change it when screwed off, but i don’t have much need to change it anyway and leave it open. the juice control on the other hand is very easy to adjust. this one is a great feauture to have and something i missed on the keras.
i even like the drip tip, though i was used to a stainless steel one before. that being said: sorry keras, you served me extremely well in the last 2 years, but i will stick with the tripod from now on as my daily driver.
the only (slight) downer is the capacity, but since a tank extension is available already this has been remedied already.
thank you atmizoo – the tripod is a wonderful atomizer! <3
ps: and a big special thank you to tasos for helping me getting my beloved lab up & running again!
Tasos –
Thank you for all the time you took to write down this very detailed review! And so happy you are digging the Tripod that much!
Well noted about the no-look refill maneuver. Also we are surely noting the somewhat stiff afc ring comment. This is done on purpose with 1st batch to ensure it won’t twist together with tank section. However will be slightly softer from 2nd batch and on 🙂
Matthias Mueller –
Im an mtl freak. I got them all. I saw a review from the j. Haze. Needed to get one. Im not dissapointed. I love it. Easily in my top 3 ( i dont insert names here). Its easy its tasty its a must have. 2ml is a bit to less needs extension kit. Dt is not my favourite. Its good but you get a better flaver with a long thinner one. Maybe you make one extra for mtl in future batches. Couldnt find anything i hate about it. Dl option i didnt test maybe i get a second one for that. Great work
Tasos –
Thank you for the positive feedback Matthias!
We are indeed considering to make either a new bespoke drip tip, a longer and thinner version more typical to what standard MTL users are used to, or, alternatively, a smarter workaround. We are looking into it and hopefully we will have some news soon!
Seppevdm –
All round amazing RTA. I’m normally a dual coil guy but after trial and error I’ve finally found my single coil match. Perfect machining. Definatly would recommend picking this up! Keep up the amazing work.
Tasos –
Thanks so much! Convincing double coil atty fans in favor of single coil with the Tripod means that this device does well what it is supposed to do 🙂
Billywhitcomb –
Without a doubt the best tank I own. The quality is amazing, easy to build on and fill. This is now my go to tank. Plus the shipping was extremely fast.
Thank you Billy
Tasos –
Billy 🙂 appreciate your kind words! When a device becomes one’s go-to, we can’t ask for more ourselves 🙂
bartosor –
24 hours delivery to France, really faaaaaaast !
I love this little thing, vaping it since a whole week at 0.44 ohm and 36 W without recotonning it.
50 ml of liquid in this week, i found this atomizer rather efficient. Savours are great.
My top RTA, no doubt about this !
Tasos –
Thank you for the positive feedback! Hope you ‘ll keep enjoying the Tripod, especially with the small additions / accessories coming in. The 3.4ml extension kit is already up, now a lot with fixed air tube choices for the 2.0mm-3.0mm range is coming, plus more nice add-ons 🙂
Cool –
Hi,
Thanks for the super-super fast delivery!!!.
Easy to build…wicks like a champ and the taste is top notch!!!…the whole rta is for me much much better then any Kayfun. Usablility is dead-easy.
Thank YOU for such a nuce product.
With kindly regards Barni-Cool-Vapes
Tasos –
Appreciate the kind words Barni 😉 Means a lot! Waiting for more substantial feedback after some days of use if you have the time. Also, if you use facebook would be perfect to see you join our group https://www.facebook.com/groups/434445727294663
Arghful –
Cant wait to get me one. Is there a chance for a upgrade kit to 4 or 5ml?
Tasos –
Thanks a lot, new Tripod batch already being prepared and expected to be ready by end of July. A 3.4ml extension kit will already be available in 1-2 days, right now being packed 🙂 Hope it will do the job for you!
gunrock52 –
Will any more be made?
Tasos –
Sure yes 🙂 Already processing new batch. hopefully we will have completed most of our in-house procedures in the next 15-20 days.
Michael –
today i have exact 2 weeks testing the tripod and i must say that i really like this RTA. First week i have make different MTL wicks (Kanthal,Inowire,NiCr80 and fine fused Clapton MTL and have also use all possible pins from 1-1,8 mm) and the second week i have take out the chimney and have used him with different coils in DL modus. The capacity 2 ml in DL is not so much, but i have see that it comes soon extension kit. I like the flavour and the look from this RTA. For the moment i use him again in MTL with simple coil NiCr, 1,2 ohms …fantastic!!! Really great work this Tripod RTA
Tasos –
So honouring after substantial testing of 2 weeks! Thank you so much Michael :))