

Intro
i The Aer consists of three distinct sections. The Base section, the Tank section and the Top Cap section.
i The Aer features some revolutionary functions, which all include at least one section of the device rotating / moving relatively to the other(s), with a certain mechanism. Please note:a. All functions require the Aer Base to be fixed and steady.
b. You will need to use two hands for some of the functions. Finger(s) of one hand gripping on a certain section to prevent it from rotating, while finger(s) of the other hand performing the function.
Vaping mode

i Triangle signs on Tank Section should be fully aligned with the air slots on Base. You are now in Vaping mode.
Access to deck

iNow, triangle signs on Tank Section should be fully aligned with the circle signs on Base.
i Hold Tank section firmly and pull up [b].
i When tank is full, do the above after turning upside down.
Access to airflow

i Lift the Tank section and look from below. The Positive Post hosts the AF Tubes in its centre hole. Grip on their outer perimeter to pull off the AF Tubes, so as to remove and replace them [b].
iAF Tube 4.0 also serves as nest for the AF Pins.
Refill

iThen pull up gently to remove Top Cap [b].
iRefill through the Seal slots.
Don’t forget that you can find more info about the Aer in the detailed manual of the device, plus useful tips and media in our support section.


