Tripod
€74.40 – €93.00
**Please note**: The SS Matte and SS Ice Matte Tripods currently in stock are kindly provided by our German distro Intrade Concepts GmbH.
The Tripod is Atmizone’s latest approach to 22mm RTA design for single coil setups. It offers an unparalleled vaping experience focusing on performance, versatility and ergonomics.
Apart from its great potential out of the box, you can tune your Tripod to fit your exact needs by choosing from a list of great accessories, like the Restricted Chimney, the Fixed Air Flow Tubes Kit, the 3.4ml Extension Kit or the Long Top Drip Tip.
The Tripod is Atmizone’s approach to 22mm RTA design for single coil setups. It
offers an unparalleled vaping experience focusing on performance, versatility and
ergonomics. With its enhanced flavor and vapor production, potential for variable specs,
instant real time access to deck, instant top refill system, easy rebuilding and attention
to details, the Tripod is one step ahead of most RTAs out there .
Apart from its great potential out of the box, you can tune your Tripod to fit your exact needs by choosing from a list of great accessories, like the Restricted Chimney, the Fixed Air Flow Tubes Kit, the 3.4ml Extension Kit or the Long Top Drip Tip. Also, all Tripod parts are available for support and maintenance purposes here.
Check out the features tab for some really interesting details about it.
Features
Tripod aesthetic features / versions
The Tripod is available in the following versions:
Stainless Steel Matte (SS Matte)
SS Matte is a light-brushed matte / satin finish, close to the natural appearance of CNC processed Stainless Steel.
Stainless Steel Ice Matte (SS Ice Matte)
SS Ice Matte is a medium blasted finish with special SS beams, darker (more dull) and more greyish compared to SS matte. The SS Ice Matte is a dynamic finish. It is not always the same and it gets darker over time. Also more prone to scratches compared to SS Matte.
Stainless Steel DLC Carbon Black (SS Carbon Black)
SS Carbon Black is a DLC treated dark shade of black, typical of carbon (coal) and closer to darker black shades. We have enhanced the dark matte result with the application of sandblasting on all outer surfaces prior to the DLC treatment. Treated are the AFC Ring, the Chimney, the Seal and the Top Cap.
Please note:
Due to the nature of Diamond-Like Carbon treatment, it is expected to find small marks and iridescence effect on certain points of the treated parts’ inner surfaces. Steps of the procedure ensure that outer surfaces of the device have uniform looks and finish, but inner surfaces can’t be processed equally effectively.
As an attribute of DLC treatment, slight tonic differences are expected in the same color between batches. Differences are not visible with bare eyes. For this, we keep stock of parts from different batches separately, in order to make sure that replacements will come from the same batch with the device when needed.
More about the DLC procedure on the Tripod here.
More about maintenance and cleaning in the Precautions section of the Tripod manual, as well as our support section.
Tripod functional features
The Deck
The deck of the Tripod is targeted for single coil setups with design details aiming to facilitate and improve rebuilding process as much as possible. Focusing on some of them, you can see high precision large pan head phillips post screws, conveniently placed rails to capture wire either between rail and screw head / body or around screw body (depending on wire D), cut – outs on outer deck rim for easier rebuilding, cut – outs on inner deck rim plus cotton wells to help proper cotton placement and juice distribution along cotton body, sufficient liquid intake slots on deck sides ( approx. 4.0mm x 2.0mm). The Tripod deck can literally host any size of single coil build, from classic small sized ones up to larger exotic coils.
The Air Flow
You may tune air flow via four pin options, each one with air hole D=1.0mm/1.2mm/ 1.5mm/1.8mm pinned inside a D=4.0mm nest. You may also regulate more “airy” flow via the AFCS Ring, adjusting from zero to D=4.0mm.
The Adjustable Chamber and Chimney
With the Tripod, we introduce the Chamber and Chimney Reducer assembly. It consists of two parts, that are sandwiching the upper part of the Chimney. When assembled, the C&C Reducer forms a vaporization chamber with lower volume (approx. 5.3mm chamber height) and a chimney with 3.0mm inner diameter, focusing on flavour oriented setups rather than vapour production. When removed, the chamber offers approx. 9.0mm coiling height and the chimney gets approx. 5.3mm inner diameter, with proper geometry to get all the clouds you want. The C&C Reducer actually offers you the potential of two different chamber and chimney geometries, thus two different single coil RTAs.
The Drip Tip
Another interesting point is the custom drip tip that comes with the device. This is a two-parts assembly as well, with its two parts sandwiching the Top Cap to ensure extra stability when removing top cap to refill. The drip tip is easily removable to let you use your own 510 drip tip.
Increased Capacity
Add to the above an upcoming extended capacity kit (3.5ml from stock 2.0ml – only available outside the EU) and you will have a good idea of Tripod’s potential for versatility.
Optimised Ergonomics
We have based on the concept of a thread-less mechanism with twist and pull / push actions in order to design and manufacture high precision parts that make vaping with an RTA so much easier. Instant access to deck can’t get any simpler and quicker. You just twist, align the small triangles that are located on the sides of chimney and deck and then pull in order to access to your deck super quickly, any time, even with a full tank. Same with refilling, as good old screw on threaded cap is no longer here. Simply align triangle on side of the top cap with the dot on the rim right below and pull up to refill through the large liquid slots. Don’t need to worry if you find it hard to spot dots and triangles: If you twist and pull gently you will definitely get it when you reach to the aligned – unlocking point of each mechanism.
Specs
– Air flow tuning via 4 pin options with air hole D=1.0mm/1.2mm/ 1.5mm/1.8mm pinned inside a D=4.0mm nest or via an AFCS Ring adjusting from zero to D=4.0mm.
– M2.5mm pan head phillips post screws.
– Two parts screw-in custom Drip Tip / inner D=4.0mm, can also host any 510 drip tip.
– 10.0mm post-to-post space, ~6.6mm post-to-post net space , ~5.8mm coil space.
– Tank capacity 2ml.
– Max. net coiling height ~9.0mm (C & C Reducer out) / ~5.3mm (C & C Reducer in)
– Chimney top inner D ~5.2mm (C & C Reducer out) / ~3.0mm (C & C Reducer in)
– Height 510 excl., 39mm [Drip Tip off] / 47.0mm [Drip Tip on]
– Weight ~56g
– SS316 foodgrade metal parts, PEEK Thermoplastic Insulators, POM (Acetal) Drip Tip, Steel nickel plated Post Screws, Borosilicate Glass Tank
What's more...
Getting Started
Before using Tripod for the first time, it is strongly recommended that you take a good look at the support section , with tons of useful info about the Tripod, including detailed introduction, assembly/disassembly guides, useful tips etc.
What’s in the box
– 1 x Tripod RTA (1 x Chamber & Chimney Reducer pre-installed)
– 1 x Set of spares (2 x Post Screws, 1 x O-ring Kit, 1 x Tank Body, 1 x AF Pins Kit)
– 1 x User Guide
– 1 x Warranty Card
66 reviews for Tripod
Add a review
You must be logged in to post a review.
You may also like…
Tripod Parts
Tripod Parts
louiskara –
Over the course of 1 month of use, I can say that it is one of the best steamers I’ve used. Excellent taste, easy to set up and easy to clean. well done atmizoo!!
Tasos –
Thank you sir! We are always here for anything you might need, also pls stay tuned as there are more interesting projects due from Atmizone 🙂
Noobulishous –
I was skeptical about going high end but I couldn’t be more happy. This rta is amazing. You definitely get what you pay for. I can say I will not be using another rta for a long time. Good job with this one. 👍
Tasos –
Thank you so much! Pls keep in touch with us, more interesting things coming 🙂
kahrgo –
This RTA is so well thought out and executed it’s a true work of art. The approach to solve the custom air flow issue makes for a larger range of air flow options and more precise control throughout. The fit and finish is perfection. This is a real game changer I am super impressed and I can’t wait to see what you come up with next!
Tasos –
Glad you are liking it and thank you for your nice words! Rest sure we are already working on some very interesting things over the last period. Keep in touch and you won’t be disappointed!
Arian71 –
I wish to- cap was threaded and you may ask why ?
Well lets say in low lights it takes ages to line up the arrow of top cap with the dot of the upper tank..
the same goes with lining arrows inside the tank if you have a dark juice.
The presentation, delivery is great
Ordered the extention tank on saturday and monday evening arrived in UK .
Arian
Tasos –
Hello Arian 🙂 Many thanks for the heads up and kind comments!
Perhaps you haven’t noticed this one (also written inside the manual of the device): You actually don’t have to look at the arrows in order to make sure they are aligned. While rotating slowly, pull gently at the same time and you will feel the point where the parts unlock and get released. Same applies both for Top Cap and for Tank section unlock mechanism. In the same way when you need to put parts back, if you push gently while rotating, you will feel the point when parts align and fit. It’s just a matter of getting used to it. When you do, it’s a piece of cake. Send us an email to support@atmizoo.com if you need any further help with this 😉
Nelecaster –
So far, every single atomizer was somehow short and I always had two or three in rotation. Until I got Tripod that is. Hands down best rta I have ever tried (goes against squape e, Kayfuns and hurricane). Design flawless, functionally and aesthetically (coming from an architect). Good design as such does not require tweaking or special charms to work: wick it you are good to go. I am MtL tobacco vaper exclusively, but I am sure I will get another one for DtL purposes as aroma and throat hit on this atomizer are amazing.. All being said: Greek brothers are doing serious job in setting standards in the industry. As far as I can tell, new collection is in the making #thrilled
Tasos –
Thanks so much for your honoring words!
Tripod is designed by an electrical engineer with years in the industry and has some touches by a civil engineer, thus it incorporates many unique features coming out of practical minds 🙂 We hope you will keep enjoying it with every new build 🙏✌️❤️
Pgillett –
Purchased based on Jai Haze’s review as he is typically pretty critical especially of high end RTAs. I am so glad I was able to get one of these wonderful RTAs. It knocked my other RTAs out of rotation. The intricacy and quality of machining are second to none. Very easy to build on, and the way you can fine tune your air flow via the pins and AFC ring makes for a magical vape. Would recommend to anyone looking for a single coil RTA.
Tasos –
Thank you for the very positive feedback! It will be very interesting if you try the Tripod with mtl and rdl / dl setups over the next period and see what you get full range 😉
SinisterDex –
By far the best atomizer i own today (i’ve just put my Kayfun on the shelf because of this) and the best experience i’ve had.
* Fast shipping ( took 4 days and that includes a weekend! )
* Great Packaging
* RTA is flawless ( clean, pristine.. just perfect condition)
The level/love of detail and versatility with this just blows my mind!
I immediatly tried the 1.5mm and the 1.2mm inserts – since i mostly like MTL.
Let me tell all MTL Lovers out there, this one is for you.
* FInally decided on the 1.2m insert
* Chamber-reducers remain installed
* built a 1.04 Ohm KA1 coil and filled it up with juice.
Vaping it at 18 Watts, AFC Ring fully open, Juice-Control halfway open and it vapes AMAZING!
I couldn’t be any happier with my purchase and will recommend it to anyone!
You just got yourself a customer for life! Really really well done and thank you for making this such an enjoyable experience!
Cheers from Switzerland,
Sandro
Tasos –
Hello Sandro 🙂 Very much thank you for your positive comments! Looks you have found yourself a nice MTL atty 😉 if you want to check it in RDL or DL mode also, I can assure you it won’t disappoint you either. All you need is time for testing!
JohnnyBravo –
Incredible fast delivery from Greece to Germany in 2 Days !
The atomizer has the perfect MTL airflow with no attachments for my personal use .
The mechanics inside to open and disassemble the atomizer are way better than the high end atomizers I used before and feels more premium beause of it .
The biggest Problem with the atomizer is the tank which is way to small .. I vape on 14 Watts and I have to refill the atomizer every 20min . Now I’ve read about an extension tank but If i’d order it I would have to pay shipping again which is nearly the same price as the bigger tank ..
But all in all it’s a really good experience using the atomizer !
Tasos –
Hallo! Thank you for the positive feedback and time to post this! The Tripod will have you occupied for quite some time, there is a whole lot to explore 🙂
About shipping, you always have the chance to get the extension kit shipped via simple post at 3 euros, which is quite ok (although not so secure and not trackable).
Besh Yousif –
This is by far my favourite tank right now. I use it for a DL vape and the flavor I get of this tank is outstanding. Atmizoo are always a pleasure to do business with and have the best customer care I’ve experienced in the industry. Looking forward to any new products they’ll produce 🙂
Tasos –
Can’t possibly ask for better feedback, thank you so much! Should you need anything from us, you already know we are right here Besh 🙂
ShowMe9 –
The Tripod is an awesome RTA and the design is perfect. As another reviewer mentioned it is a beautiful atty. I held off on posting a review as I wanted to spend a good amount of time with my Tripod (SS Ice Matte batch 1 received 24 June) before offering my assessment.
I’ve used the Tripod with MTL, RDL and DL and it performs very nicely with each. Though I am mainly MTL/RDL but do enjoy DL as well. The JFC works great and airflow options are endless. It works perfectly with each of the AF inserts (1.0mm/1.2mm/1.5mm/1.8mm) for MTL and I can get a solid RDL with the 1.8mm insert. Tank refills are a total breeze. The Tripod truly offers a fantastic vape for all styles IMO.
The Tripod works great with simple round wire builds (28g or 26g kanthal) as well as 32gx3/40g ss316L twisted fused clapton (MTL), 36ss/26ss clapton and 36k/28k clapton wire. I enjoy switching up my builds and the Tripod is great for that. It is a very simple task to build on the Tripod deck. It works perfectly with cotton or rayon wicking.
Currently I have my Tripod setup with the 3.4ml extension kit and the 1.5mm AF insert installed. My build is a 7 wrap 32gx3/40g ss316L twisted fused clapton with a 2.5mm ID coming in at 0.7Ω and the flavor is awesome in wattage or TC (MTL). It’s a serious flavor banger. IMO the Tripod delivers better flavor than the Prime or Dvarw MTL. I also tested Hussar Project X (standard and MTL versions) versus the Tripod. I did some extensive side-by-side testing using the same builds/juices in each and the Tripod wins by a wide margin over the Prime or Dvarw. The Project X is able to hang with the Tripod for flavor IMO but I do like the design of the Tripod better.
One thing I have noticed is that I am getting flavor notes with certain juices I never knew existed with the Tripod versus other RTA’s. It does not matter what type of juice is used the Tripod is the top shelf performer and delivers flavor for days. I guess it is safe to say the Tripod is my favorite RTA (I have a large collection). I have had zero issues with my Tripod.
Did I mention that I cancelled my order for the nKFL? Yes, I certainly did. I see the new Kayfun Lite 2019 as a Prime Lite if you will (identical build decks). There is zero chance of it outperforming the Tripod IMO.
Atmizoo is a wonderful company to do business with. Shipping is fast from Greece to the USA as in three business days for every product I’ve purchased (2 Creeks, the Tripod and spare parts). Once batch 2 is released I will be buying another Tripod (SS Matte). Yes, the Tripod RTA and Creek RDA are that good!!!
Tripod = my go to RTA. Thank you Atmizoo … you rock!
Tasos –
Hello 🙂 Many thanks for the very detailed review and the kind words! Happy that you like both the Tripod RTA and the Creek RDA!
What is also very important to us, is that we pay equal attention to after sales service and support, and not only to the products alone.
This ensures everyone that they will be happy with a quality product for a long time, with replacement parts available for substantial time and also immediate support to any issue / future inquiry.
Thanks a bunch once again!