Lab 35 HP Edition x Keras Nano
€224.56
This vaping kit combines the robust, uni-tube design and unmistakable style of the Lab 35 HP Edition and the Keras Nano, which is Atmizone’s Nano-sized multi-purpose tank.
Complete this vaping kit by choosing one of our unique Drip Tips .
This Vaping Kit consists of the following components:
1.The Lab 35 HP Edition is the 18350 version of our most innovative, hard-hitting mechanical mod with the High Performance Peek Switch pre-installed. The Lab HP Edition sets a new standard in mech mod performance and safety, since it has been designed to include advanced safety features with a minimal or zero impact on dimensions or performance.
2.The Keras Nano is Atmizone’s Nano-sized, multi-purpose tank atomiser concept: high-end RTA and top quality vape tank for factory coils, two in one.
For more details about each and every component of this Vaping Kit, please check out the Description Tabs of the Lab 35 HP Edition or Keras Nano . Also, don’t forget to visit our support section, with tons of useful info about use and maintenance.
Features
Lab35 HP Edition
– Sturdy, refined top-side-mounted switch with silver-plated brass contacts and twist-locking functionality.
– The Lab switch is a smoother, more robust version of our innovative Roller / Dingo switch, a common point of reference for all current top-firing mech designs. All critical components of the new switch are heavily reinforced and 100% liquid-sealed. New switch versions have one twist-locking position (twisting a quarter-circle anti-clockwise) instead of two (older version) due to machining procedure refinements.
– Robust, lightweight 304 food-grade stainless-steel construction with a minimum number of parts for a low-loss, super-efficient operation, unseen in existing top-firing designs.
– Configurable to use a Spring-Loaded, Springless-Fused, or Springless-Direct negative battery connection, for a high-performance or safety-oriented operation.
– Dependable short-circuit protection (Springless-Fused mode) based on a super-low-voltage-drop, resettable PTC element, suitable for resistances down to 0.5 Ohm.
– Hybrid-style, future-proof top connection with open airflow.
– Fits 18500 batteries by mounting a T16 extension.
Keras Nano
– Available in two versions of different size and capacity, Giga REV and Nano, also with the option to switch easily from Giga REV to Nano mode and vice-versa
– You can go from Nano to Giga REV using this transformation kit.
– You can go from Giga REV to Nano, by only installing the Nano Tank Body.
– The Nano Top Cap is now common between the two versions, Nano and Giga REV share the same top cap.
– High-quality rebuildable deck with a decent building space of about 10.50mm (diameter), for classic, horizontal type custom single builds.
– Removable rebuildable deck section, switching from RBA to factory coils tank (Triton/Atlantis or Vaporesso target cell coils.)
– Amazingly accurate air flow control ring: for MTL (mouth-to-lung) in RBA mode (air adjusting from zero up to a max of D2.00mm – internal airflow tube diameter),but also for STL (straight-to-lung) hits with a range of factory coils.
– One-piece deck positive pole for RTA mode, gold plated self-adjusting positive pole for factory coils mode, to minimise voltage drop and peak performance for TC setups.
– Easy top refill mechanism, by unscrewing top cap.
Specs
Lab 35 HP Edition
– Diameter: 22.0mm.
– Length: 63mm.
– Weight: ~75g.
Keras Nano
– Diameter: 22.0mm
– Length: 35.0mm(Borosilicate tank installed) / 34.50mm(PMMA tank installed) – (drip tip and male pole not incl.)
-Weight: ~57g
-Capacity: 2.0ml(rebuildable deck installed)/ 2.1ml(factory coil installed)
-Robust, lightweight stainless-steel construction, 316 food-grade SS outer parts, 316 food-grade SS rebuildable deck parts, PEEK thermoplastic polymer electric insulators.
-Two Tank Body types: preinstalled Tank made of PMMA Glass approved for medical use, extra Borosilicate Glass Tank with fused ends also in the box.
What's more...
Getting Started
The Lab 35 HP Edition is a 100% rebuildable, high performance mechanical mod of moderate complexity. It is suitable for experienced vapers who possess a good understanding of the nature of mechanical mods and electric power transfer, but it is also simple and easy enough to be used by intermediate vapers who have the desire to learn the ins-and-outs of their vaping gear in order to get the most out of it.
Mech mods are sophisticated, enthusiast-oriented vaping tools. By nature, a mechanical mod requires:
– Proper handling.
– Frequent maintenance.
Proper handling guidelines are specific to each device. Thanks to its uni-tube design, the Lab is a mod that is very easy to use without requiring constant attention. To help you get up to speed with your new Lab, we have written up a quick reference of 9 Important Tips, which also includes some more general, essential information about mech mods and vaping gear.
The Keras Nano is a top quality versatile tank, mainly for MTL (mouth-to-lung), that can also do the job for STL (straight-to-lung) hits. Suitable for a wide resistance range (sub-ohm up to higher res), temp control setups or any other wire setup, factory coils or custom builds.
Before using your Keras for the first time, it is strongly recommended that you take a good look at the support section, with tons of useful info about the Keras, including detailed introduction, rebuilding guides, assembly/disassembly guides, useful tips etc.
Warranty and Support
Both Lab 35 HP Edition and Keras come with a fair and generous warranty, which covers all manufacturing defects.
Be the first to review “Lab 35 HP Edition x Keras Nano”
You must be logged in to post a review.
You may also like…
Keras Parts
Guppy/Lab Parts
Keras Parts
Keras Parts
Reviews
There are no reviews yet.