Add to Wishlist

Keras Giga

€117.80

Atmizone’s big-sized, multi-purpose tank atomiser concept: high-end RTA and top quality vape tank for factory coils, two in one. [more]

The Keras Giga is the large version of a top-notch RTA for classic, horizontal type custom single builts, which offer consistent vapour volume, powerful flavour reproduction and hard hit. The deck can easily be removed as an one-part assembly, to be replaced by an Aspire Atlantis/Triton or Vaporesso Target cCell factory coil. This way the Keras Giga turns into a vape tank for factory coils in just an instant.

All the above, in a minimal design which is realised with top quality materials, an amazingly accurate air flow control system, and Atmizone’s usual attention to detail. A top quality versatile tank, mainly for MTL (mouth-to-lung), that can also do the job for STL (straight-to-lung) hits. Suitable for a wide resistance range (sub-ohm up to higher res), temp control setups or any other wire setup, factory coils or custom own built, all in one.

Out of stock

SKU: KE-G/KIT Categories: ,

The Keras MTA realises Atmizone’s multi-purpose tank atomiser concept: high-end RTA and top quality vape tank for factory coils, two in one.

The Keras has been conceived to fulfil the combined needs of those vapers, who want somehow to easily switch between sustainable factory coils and rebuildable deck.

With the rebuildable deck installed, the Keras is a top-notch quality RTA. It features a high-quality deck with a decent building space of about 10.50mm (diameter), designed to allow usual, horizontal type custom single builts, for consistent vapour volume,powerful flavour reproduction and hard hit.

The deck can easily be removed as an one-part assembly, and be replaced by an Aspire Atlantis/Triton or Vaporesso Target cCell factory coil, this way transforming the Keras into a vape tank for factory coils in just an instant.

The Keras is a top quality versatile tank, mainly for MTL (mouth-to-lung), that can also do the job for STL (straight-to-lung) hits. Suitable for a wide resistance range (sub-ohm up to higher res), temp control setups or any other wire setup, factory coils or custom builds.

Features

  • Available in two versions of different size and capacity, Giga and Nano (details below), also with the option to get Giga-to-Nano and Nano-to-Giga transformation Kits
  • High-quality rebuildable deck with a decent building space of about 10.50mm (diameter), for classic, horizontal type custom single builds.
  • Removable rebuildable deck section, switching from RBA to factory coils tank (Triton/Atlantis or Vaporesso target cell coils.)
  • Amazingly accurate air flow control ring:

    – for MTL (mouth-to-lung) in RBA mode (air adjusting from zero up to a max of D2.00mm – internal airflow tube diameter),
    – but also for STL (straight-to-lung) hits with a range of factory coils.

  • One-piece deck positive pole for RTA mode, gold plated self-adjusting positive pole for factory coils mode, to minimise voltage drop and peak performance for TC setups.
  • Easy top refill mechanism, by unscrewing top cap.

    • More info you need to know:

  • Giga version specs

    Diameter: 22.0mm
    Length: 54.0mm (drip tip and male pole not incl.)
    Weight: ~81g
    Capacity: 3.8ml(rebuildable deck installed)/ 4.0ml(factory coil installed) .

  • Nano version specs

    Diameter: 22.0mm
    Length: 35.0mm(Borosilicate tank installed) / 34.50mm(PMMA tank installed) – (drip tip and male pole not incl.)
    Weight: ~57g
    Capacity: 2.0ml(rebuildable deck installed)/ 2.1ml(factory coil installed) .

  • Robust, lightweight stainless-steel construction, 316 food-grade SS outer parts, 316 food-grade SS rebuildable deck parts, PEEK thermoplastic polymer electric insulators.
  • Two Tank Body types: preinstalled Tank made of PMMA Glass approved for medical use, extra Borosilicate Glass Tank with fused ends also in the box.

    • Getting Started

    Before using your Keras for the first time, it is strongly recommended that you take a good look at the support section, with tons of useful info about the Keras, including detailed introduction, rebuilding guides, assembly/disassembly guides, useful tips etc.

    Warranty and Support

    The Keras comes with a fair and generous warranty, which covers all manufacturing defects.

    2 reviews for Keras Giga

    1. Andre –

      Just a quick note to say thanks Tasos. I received the brushed matte Keras Giga in super quick time. I needed something to pair with the ice matte version I already have 🙂

      Please keep making these mouth to lung/restricted lung hit tanks – they are simply brilliant!

    2. Andre –

      If you’re looking at this review then do yourself a massive favour and buy the Keras Giga. It is without a doubt the best flavour tank I have. The deck is super easy to build on and wicking is a doddle (more on that later).

      I watched Qorax’s review of the Keras and within 5 minutes I had bought one! It’s beautifully designed & built, ideal for a mouth to lung vaper who occasionally enjoys lung hits.

      Within a few days I received my new toy and I was in flavour heaven! What the Keras does with flavour is nothing short of amazing (it’s noticeably better than my Kayfun 5 which I know is a bold statement to make). It also wicks brilliantly – every inhale creates the perfect amount of chamber vacuum which pulls juice into the cotton with gusto. There hasn’t been so much as even a hint of a dry hit since day one.

      To the people at Atmizoo I say this: thank you for creating my perfect tank 🙂 You have gained a loyal fan.

      Andre

      • Tasos –

        Andre 🙂 thanks so much for taking the time to write the kind comments! Rest sure we will be right here for anything you might need in the future – our support service level is even higher than the Keras flavour 🙂

    Add a review