Creek
€68.20
Atmizone introduces the Creek, our new 22mm RDA for ideal single-coil setups. Squonk-ready out of the box, the Creek also includes both MTL and DL oriented options in the package.
Atmizone introduces the Creek, our new 22mm RDA for ideal single-coil setups. Squonk-ready out of the box, the Creek also includes both MTL and DL oriented options in the package.
Its design allows juice bottom feed, while at the same time driving air right under the coil.
Check out the features tab for some really interesting details about it.
Features
The juice well, deck and vaporisation chamber
Creek’s juice well is designed with a capacity of at least 1.2ml (depending on cotton used), offering great autonomy. The deck makes rebuilding really straightforward, with the design of its posts, auxiliary “rails” on top, and well-sized phillips pan head post screws helping for this purpose. It can host various types of single coil setups, from small up to large exotic type coils. The inner formation of the Top Cap, together with the deck parts design, create an ideal vaporisation chamber, which prevents condensations to reach up to the drip tip with ease, also being leak-proof when vaping or carrying the device around. What’s more: The Top Cap collaborates with the Base / deck via a smart one-way locking mechanism, which allows instant access to deck but at the same time ensures safety against unwanted access from children (TPD compliant) or opening the device by accident.
The Airflow
With this BF RDA, Atmizone’s airflow concept includes four parts collaborating in a simple but effective way, in order to regulate and drive air from the side of the Top Cap until it reaches right under the coil. Air is regulated via the small / large side slot of the Top Cap, then goes through slots of Base, Pos Post Insulator and path of Pos Post respectively, so that the air flow finally comes to the resistance from beneath. This helps to optimise vaporisation and enhances flavour, while allowing the juice bottom feeding function to work flawlessly.
MTL or DL?
The Creek is actually suitable for both MTL and DL vaping. This is achieved by installing the Positive Post made for each vaping style, both coming right out of the box. Each Positive Post features a proper sized path of air flow inside. One DL oriented with cross section similar to a hole D≥4mm and one MTL oriented with cross section similar to a hole D≥2mm. Likewise, Creek’s Top Cap design incorporates one different side slot on each side, one large / DL oriented with cross section similar to a hole D≥4mm and one small / MTL oriented with cross section similar to a hole D≥2mm. Long story short: You choose the Pos Post you prefer and regulated it with the corresponding side slot of the Top Cap.
The drip tips
Product package brings you two different wide bore drip tip designs. They are both delrin to reduce heat but also serve as adapters for 510 drip tips. This way you may vape directly if you vape DL, or use your own favourite MTL drip tip on top if you vape MTL. Trying to take all details into account, collaboration between Top Cap and drip tips is normally tight in order to allow dripper function by removing the drip tip, but there is also an alternative o-ring which is included in the box for extra tight collaboration between drip tip and Top Cap.
Specs
– Air flow tuning via two Pos Post designs, one DL oriented and one MTL oriented. Air flow fine adjustment with Top Cap small (MTL oriented) or large (DL oriented) side slot.
– Robust, lightweight stainless steel 316 food-grade construction, PEEK thermoplastic polymer electric insulators, acetal drip tips.
– M2.5mm pan head phillips SS, nickel plated post screws.
– 11.2mm post-to-post space, ~7.0mm post-to-post net space , ~6.5mm net coiling space .
– Juice well capacity ~1.2ml
– Max. net coiling height in the chamber ~5.5mm.
– Height 27.0mm [top to bottom, 510 excl., tip “A” installed]/ Height 29.0mm [top to bottom, 510 excl., tip “B” installed]
– Weight ~38g
What's more...
Getting Started
Before using Creek for the first time, it is strongly recommended that you take a good look at the support section , with tons of useful info about Creek, including detailed introduction, assembly/disassembly guides, useful tips etc.
What’s in the box
– 1 x Creek BF RDA (1 x MTL Pos Post, 1 x BF Pole, 1 x “A” Drip Tip pre-installed)
– 1 x Set of spares (2 x Post Screws, 1 x O-ring Kit, 1 x Blind Pole, 1 x DL Pos Post, 1 x Hex Key 2mm, 1 x “B” Drip Tip)
– 1 x User Guide
– 1 x Warranty Card
Compliance with Regulations
Tobacco Products Directive 2014/14/EU (TPD)
– for the UK / https://www.gov.uk/guidance/e-cigarettes-regulations-for-consumer-products list of submitted products line 11043
CE / RoHS Directive 2011/65/EU
This is a CE / RoHS conformed product, declaration of conformity as per below.
Documentation
Some useful docs about the Creek:
Creek ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ [GR] light
RoHS DECLARATION OF CONFORMITY Creek [EN]
6 reviews for Creek
Add a review
You must be logged in to post a review.
You may also like…
Creek Parts
Creek Parts
Creek Parts
Tenza88 –
I’ve only had mine for a few hours and it’s now my favorite RDA. The airflow wide open is perfect for how I vape a little restrictive but not to much
Tasos –
Thank you so much 🙂 Hope you will keep enjoying it after many more days of use.
amoren –
Hi! I was searching for the best flavour single coil RDA for my squonk mod and to be honest I tried out many: Recurve, Entheon, Hadaly, Haku and many more but I have to say Creek has better flavour than any of them, so I’m totally satisfied 🙂
Its the best RDA I ever had. I received my order in 20 hours which is a new record I think. I never seen that kind of machining before, the quality of the used materials are excillent, the polishing of the barrel and the drip tips are fenomenal. After a month usage it was leaking just 2 times, but in general it also seems leakprof. That is the RDA I was ever searching for 🙂
Just few tips / notes:
– Avoid stuffing side wells with too much cotton, trim the ends of the cotton properly to help the liquid to travel to the coil and prevent oversquonking, also it has to be squonked carefully since it gives not a lot squonk feedback
– One youtuber said the O-rings quality is not the best they usually broke, but its not true. The O-rings are fine, just after rebuilding you have to put back the top cap carefully, otherwise in some cases, when the upper O-ring on the deck somehow becomes a bit loose, the airflow cutout on the barrel will cut a piece out from O-ring. If you plan to make an upgraded version for example, move airflow cutout upper to prevent this from happening 🙂
Tasos –
Thank you so much for your kind words and for your detailed feedback. Excellent remark what you say about the o-rings and the need to be cautious with aligning properly to put the top cap back on. This way they will be protected and not tear out.
Steve –
The Creek is a wonderful atomizer, great flavour, fantastic build quality and super smooth airflow. It has gained a permanent place in my rotation of atomizers.
Initially, I didn’t think I would like the standard drip tip (A type) as I generally don’t like wide bore drip tips – but in fact I find it very comfortable to use.
One tip to others: If you stuff the side wells with too much cotton, it makes the atomizer much more likely to leak/oversquonk – once I moderated my cotton use a bit I do not have this problem.
One additional note: I had my Creek in my hands less than 24 hours after ordering, from Greece to rural Sweden!
Tasos –
Hey Steve,
Thanks so much for your kind review! Indeed, the juice well of the Creek is not supposed to be over-stuffed with cotton. It more kind of acts as a reservoir for excessive liquid, either on purpose or after over-squonking. Good point there!
Hope you keep enjoying your Creek RDA and stay with us as there is more coming out of the lab in the next period 🙂
Ethan-means –
Let’s get started on this beautiful little piece out of Greece. I ordered this RDA for the quest of ultimate flavor, naturally you’d lean towards a single coil 22mm RDA and that’s exactly what I did. This RDA came from a company called atmizoo out of Athens Greece mostly known for their billet box accessory called the vapeshell. I didn’t know much about this company nor their products besides the vapeshell however, I can say I am thoroughly impressed by this little dripper.
Packaging- This RDA came in a tin box with the optional MTL deck, O-rings, studded 510, and an Alan key for the squonk pin. Included is an authenticity card, user manual, and a Atmizoo sticker. Packaging for a high end device is completely adequate and informative. Packaging was nothing over the top as well as not coming in a little plastic bag, a happy medium.
Finish and quality- When I revived my Creek I can happily say the machining quality was one of the best I have ever seen. The finish is absolutely beautiful I got mine in the matte ice finished which is bead blasted I’m assuming. Note there will be PG on the O-rings.
Build deck- The build deck makes me reminisce of the old days of trapping your leads under a screw with a new twist. The deck is extremely easy to build on and has handled everything I’ve thrown at it so far. Trapping the leads under the screws is very easy thanks to ledges machined in to keep your wire in place. The airflow sits right underneath the coil bringing you warm delicious flavor!
Flavor- Let me say this flavor is unmatched and hands down the best. The direct lung deck is sufficient airflow it’s not too restrictive but it’s not too open where it destroys the flavor. By far one of the better RDAs I have tried.
Thank you from the USA for creating such a wonderful RDA it truly makes me fall in love again with vaping 🙂
~ Ethan
Tasos –
Hello Ethan, hands down one of the most flattering reviews we have ever received 🙂 Many thanks for all your kind words, can’t expect more from any customer. We should now try even more to keep up with your expectations. Hope our coming projects will also appeal to you as the VapeShell and the Creek did well up to now 😉
Please know our support is right here for any advice / help / any type of inquiry you might need from us in the future!
Pierre –
I was lucky to receive the Creek as a gift from Atmizoo – thanks Taz! But don’t get me wrong, this review is certainly not biased. I was actually looking at getting the Creek anyway at some point to join my high end collection. And this would have been a smart decision for sure!
The RDA is very well built, the packaging, without being extravagant or non-existant like for some others, is exactly what it shall be intended for, and the spares are all what you need.
Most important, the RDA performs! Very easy to build (without going into extra huge coils, you can fit round wire or fused claptons no problem), very easy to wick. The airflow adjustment does have some effect (this is not always the case) so you can dial in to your perfect draw, and the flavor is just there, perfect, without having to dial in the coil to the 1/10th mm – likely thanks to the bottom airflow.
Cherry on the cake, the squonk design within the RDA is really smart and makes it pretty difficult to oversquonk, despite the bottom airflow.
This is my second product from the Atmizoo team, and no deception! Well done!
Last, worth mentioning that this RDA, like all other Atmizoo products, is pretty well placed in terms of Quality/Price ratio.
Happy to have this one in my rotation! What else!!!
Tasos –
Thank you for the detailed and super- kind review Pierre! Hope you keep enjoying your Creek for a long time :))
Tim –
Dear All at atmizoo.
You deserve to be truly congratulated for the outstanding Creek, delivery in perfect time, excellent presentation and truly exceptional customer service.
The Creek is beautifully engineered and building is straightforward providing smooth and great flavour.
The Nema driptip partners particularly well with the Creek 510 nano adapter.
With many sincere thanks.
( P.S. When will the Hive and Hive V2 be available ? )
Tim.
Tasos –
Dear Tim,
Thanks so much for all the kind words, and more thanks as I know that posting this review has been a pain for you my friend 🙂
PS: Hive v2 (the successor of older Hive) runs custom small batches periodically, changing finish / colour with each batch. There is actually no precise ETA of next batch yet, we will schedule things and make relative announcements on our social when having something tangible 🙂