Bayou 19
€17.30
Cartomiser tank with 19.5mm external diameter, equipped with an easy-refill system – ideal for new vapers and a perfect match for the Guppy. [more] Functional, food-grade construction with a minimal style.
The Bayou 19 consists of a closed-end, food-grade PMMA acrylic (plexiglass) container (35mm or 45mm) and screw-on caps, which are available in the following variations:
- SS-M (SS, brushed Matte),
- SS-P (SS, Polished), and
- SS-IM (SS, shot-blasted Ice-Matte).
- BR-M (Soft Brass, brushed Matte).
- BR-EM (Soft Brass, shot-blasted Earth-Matte).
- PC/PY/PG/PF/PIB (PMMA Plexi Clear/Yellow/Green/Fuchsia/Ice-Blue).
Below, you may create your ideal Bayou setup, via a step-by-step selection of the caps TYPE, the overall LENGTH fitting short or long standard sized cartomisers, the TANK body COLOR, and finally the CARTOMISER TYPE which you choose to be included in the Bayou package (one coil included). For more about the cartomisers that we suggest for use with the Bayou, please see the cartomisers category page in our shop section.
Featuring a unique screw-on cap design and an innovative, easy side-refill system, the Bayou is a robust, minimal tank for 510d cartomizers and 510d-type rebuildable atomizers.
The Bayou has been designed in a function-oriented manner to solve the most common issues associated with conventional tanks:
- Screw-on cap design: The Bayou will never just pop open no matter how you handle it.
- Closed-end, food-grade PMMA acrylic glass container that keeps e-liquid fully sealed and isolated from both caps.
- Close-to-bottom inner tank o-ring placement for maximum capacity and compatibility with pre-punched cartomizers and 510d-type RBAs with supply holes close to their base.
- Refilling the tank is fast and easy using a 1.0-1.3mm needle-equipped container (supplied with the Bayou): Unscrew the cap, insert the needle sideways, refill, screw the cap back on, done!
- High capacity for its size: Bayou 19 S (35mm) – 2.5ml, Bayou 19 L (45mm) – 4.0ml.
- Extension ring for a flush connection when used with the Roller / Dingo and a Classic 510 connector. The extension ring increases the length of the tank by 1.0mm and can be also used with odd-sized cartomizers, or with any 510d-type atomizer, if you like its looks.
- Simple air-flow control when used with the Roller or Dingo and a Classic 510 Connector.
- Compatibility and flush connection even with bottom-lock-equipped cartomizers.
- Bottom cap with air-flow channels: The Bayou will not choke your vape even when sitting flush on your mod.
- Low-weight construction: 18g (SS versions) or just 6g (Plexi versions).
With its 19.5mm external diameter, this compact version of the Bayou is a perfect match for the Guppy, our brand-new, 16340 uni-tube mini-mech. If you are a fan of small-diameter, lightweight gear, you might have just found the tank you’ve been looking for.
Important
-
- When topping-up the Bayou, always insert the needle sideways, between the cartomizer and tank walls, and point it slightly downwards. Note that this is only possible with a 1.0-1.3mm needle. A suitable needle-tipped bottle is supplied with every Bayou. When re-filling the tank like this (see video below), air is allowed to exit through the same hole while the tank is topped up, which prevents flooding and allows you to fill the tank in an upright position. If you use a filling tip that prevents air from exiting the tank, remember to hold the tank upside-down as you top up (not recommended).
-
- The main container of the Bayou has a removable PMMA top-seal. Normally, you don’t need / shouldn’t remove it when using properly designed cartomizers or 510d-type RBAs. The PMMA seal does not need to be removed even when washing the tank. However, if you *must* remove it, do so by pushing it out *gently* from the inside of the tank. This can be done by inserting a cartomizer through the bottom (as usual) and pushing it off-centred so as to pop out the PMMA seal. Do not pry it out from the top using nails / sharp objects!
5 reviews for Bayou 19
Add a review
You must be logged in to post a review.
Sally –
Perfect match for the Guppy and Ray. I always struggle with carto tanks but not with this one. The Bayou is so well thought through. The carto doesn’t twist or slide, the device doesn’t come apart in your hand when you remove it from your mod, and filling it is so simple and mess-free. Have already ordered more. Only thing I would wish for as an extra would be an option to buy a spare tube that could take tankcracker juices, especially as cartos mute the flavour so stronger flavours are needed.
Ordered one day and delivered in the UK the next, brilliant.
Nigel Sandoe –
Ordered 2 more tanks and a spare on Monday at 4. They were delivered to my address in the UK at 1.30 on Wednesday. Amazing.
Nigel Sandoe –
Best thing since sliced bread.
Have been using the Bayou for about 3 weeks. Easy to fill with a syringe bottle. Just tilt a little to get air out of the same hole. Has worked flawlessly so far. I chose the smaller diameter tank because using a bottom firing 22 mm mod in 18350 mode gives you a ridge to hold on to as you push the bottom button upwards.
I am very impressed and I will be ordering another one with a spare tank.
Thank you Atmizoo.
Celia –
This is a fantastic tank, the quality & design are first rate. It’s easy to fill & it looks just gorgeous. The combo with the Guppy & Ray is a match made in vaping heaven!
Nico –
Hi guys.
Less than 24 hours for the delivery, amazing 🙂
Really enjoying my dingo/bayou combo so far, very nice little tank so simple and fast to refill.
Keep up the great work!
Best regards.