Add to Wishlist

Bayou 22

€18.60

Cartomiser tank with 22mm external diameter, equipped with an easy-refill system – ideal for new vapers and a perfect match for the Lab family. [more] Functional, food-grade construction with a minimal style.

The Bayou 22 consists of a closed-end, food-grade PMMA acrylic (plexiglass) container (35mm) and screw-on caps, which are available in the following variations:

  • SS-M (SS, brushed Matte),
  • SS-P (SS, Polished), and
  • SS-IM (SS, shot-blasted Ice-Matte).
  • BR-M (Soft Brass, brushed Matte).
  • BR-EM (Soft Brass, shot-blasted Earth-Matte).
  • PC/PY/PG/PF (PMMA Plexi Clear/Yellow/Green/Fuchsia).

Below, you may create your ideal Bayou setup, via a step-by-step selection of the caps TYPE, the TANK body COLOR, the COSMETIC RING type and finish and finally the CARTOMISER TYPE which you choose to be included in the Bayou package (one coil included). For more about the cartomisers that we suggest for use with the Bayou, please see the cartomisers category page in our shop section.

SKU: BA22 Category:

Featuring a unique screw-on cap design and an innovative, easy side-refill system, the Bayou is a robust, minimal tank for 510d cartomizers and 510d-type rebuildable atomizers.

With its 22.0mm external diameter, this version of the Bayou is ideally paired with the Lab, but will look great on any 22.0mm mod.

The Bayou has been designed in a function-oriented manner to solve the most common issues associated with conventional tanks:

  • Screw-on cap design: The Bayou will never just pop open no matter how you handle it.
  • Closed-end, food-grade PMMA acrylic glass container that keeps e-liquid fully sealed and isolated from both caps.
  • Close-to-bottom inner tank o-ring placement for maximum capacity and compatibility with pre-punched cartomizers and 510d-type RBAs with supply holes close to their base.
  • Refilling the tank is fast and easy using a 1.0-1.3mm needle-equipped container (supplied with the Bayou): Unscrew the cap, insert the needle sideways, refill, screw the cap back on, done!
  • High capacity: 5.0ml.
  • Cosmetic/Extension ring for a flush connection when used with the Roller / Dingo and a Classic 510 connector. The cosmetic/extension ring increases the length of the tank by 1.0mm and can be also used with odd-sized cartomizers, or with any 510d-type atomizer, if you like its looks and want to spice up the overall appearance.
  • Simple air-flow control when used with the Roller or Dingo and a Classic 510 Connector.
  • Compatibility and flush connection even with bottom-lock-equipped cartomizers.
  • Bottom cap with air-flow channels: The Bayou will not choke your vape even when sitting flush on your mod.
  • Low-weight construction: 18g (SS-M, SS-P, SS-IM, BR-M, BR-EM versions) or just 6g (Plexi versions).

Important

    • When topping-up the Bayou, always insert the needle sideways, between the cartomizer and tank walls, and point it slightly downwards. Note that this is only possible with a 1.0-1.3mm needle. A suitable needle-tipped bottle is supplied with every Bayou. When re-filling the tank like this (see video below), air is allowed to exit through the same hole while the tank is topped up, which prevents flooding and allows you to fill the tank in an upright position. If you use a filling tip that prevents air from exiting the tank, remember to hold the tank upside-down as you top up (not recommended).

Topping up the Bayou

    • The main container of the Bayou has a removable PMMA top-seal. Normally, you don’t need / shouldn’t remove it when using properly designed cartomizers or 510d-type RBAs. The PMMA seal does not need to be removed even when washing the tank. However, if you *must* remove it, do so by pushing it out *gently* from the inside of the tank. This can be done by inserting a cartomizer through the bottom (as usual) and pushing it off-centred so as to pop out the PMMA seal. Do not pry it out from the top using nails / sharp objects!

Removing the Top Seal – The Right Way

1 review for Bayou 22

  1. baxter001 –

    As they say, the perfect partner for the Lab, my usual new-tank nerves as to how good the lower seal would be were needless with with the Bayou, a perfect seal coupled with a simple filling and sealing mechanism.

    Currently running with slotted boge cartomizers but their support staff assure me it works happily with either flanged or non-flanged versions of the diver V2 which is currently speeding its way to my doorstep.

Add a review