One of the most important elements of every atomizer build is the total resistance of the atomizer. Different atomizer types work best with different resistance ranges for a number of reasons related to: i) the diameter of the resistance wire, ii) the diameter of the windings and iii) factors related to heat transfer. These properties […]
Here’s a set of tests conducted on a new Roller, a Dingo and a Guppy. The presented method relies on measuring and subtracting the voltage drop component that corresponds to the internal resistance of the battery from the total measured drop. The voltage drop on the battery “outside” the mod is practically the same as […]
You asked for them – and here they are: Rhodium-plated connectors for the Roller and Dingo! The rhodium-plated brass connectors are specialty items – they have been made for Roller/Dingo owners that demand the absolute best performance from their equipment and never forget to give it the care it deserves! Rhodium-plated brass connectors provide better […]
Let’s get off on the right foot by asking a simple question: What was wrong with the existing spring design? The quick answer is, simply put, “nothing”. Or, better, the answer really depends on your individual criteria. To answer the question thoroughly, we’ll need to see what a hot-spring actually does, and how. Appearances can […]
Without regular maintenance or proper handling, the contacts of a mechanical mod may start to overheat, which can cause damage to their silver plating and as a result, misfires. Some usual causes for contact overheating are: i) juice leaked into the switch, ii) dirt or dust, iii) hard, violent, long short-circuits, and iv) successive presses […]
An ideal DC voltage source and a resistor is all that’s needed to start delving into the fundamentals of Electric Circuits, at least on paper. No matter how simple, a circuit with a resistor powered by a DC source is a quite good approximation for many applications, including our beloved vaping devices. Although this simple […]
The design of the Roller started in early 2012 as the first team project of Atmizone, without much fanfare or promises. At the time, the project was little more than a proof of concept for an unconventional mod with a top-side mounted, fully repairable and lockable switch, unlike anything that existed in the market at […]
In the last few days, we’ve received quite a lot of questions, along with some really valuable feedback related to the design of the 510 connector on Roller & Dingo. So, it’s now time to put things into perspective! The 510 connector on both Roller & Dingo has been designed to be exchangeable / customizable, […]
