Feb
After released, two full years ago, the VapeShell has been a milestone for the Billet Box community. It took one step forward compared with other suggestions at that time, with its deck shape and air flow options, offering a totally new potential for Billet Box users. The acceptance of the VapeShell has shown the way, so Atmizone’s bridge has added its little something to the Billet Box mania and the development of more Boro compatible AIOs over the past two years.
Only that, for us here in Atmizone lab, it is about time to get over the Boro / bridge concept. We bring you the VapeSnail, not another bridge but a complete RTA suggestion, bespoke to fit inside the Billet Box and Boro compatibles and ready to set a new paradigm to the world of AIOs.
RTA, not another bridge
The VapeSnail takes many steps forward, as it is much more than just another rebuildable bridge. Being an RTA with a custom dedicated tank of its own, it features real time access to deck and real time ability to change the air flow tubes, plus a custom condensations plug with optimal sealing ability and it’s own absorbent material, and many many more features you will love. Its tank is made of a special medical grade plastic called PCTG. It’s the same plastic that is used for approved baby bottles and medical appliances, FDA approved, totally safe and 100% resistant against cracker liquids. The tank hosts a large front port for refilling purposes, with a silicon cover which is easy to remove and replace in an instant. If you take the VapeSnail out of its AIO nest, and flip it upside down, you can have access to deck in seconds, by just pulling the tank section off the Deck section. The deck features a huge space which is able to host many different approaches of one-coil rebuilding, from simple round wire to large exotic coils. The air flow of the VapeSnail is dialled in by a set of Positive Tubes with different inner diameter. By choosing your preferred inner diameter out of five fixed flow AFC Tubes (2.0/2.5/3.0/3.5/4.0mm inner D), you can have a tighter or more loose draw from loose MTL, RDL to a full open 4mm DL, having the air flow adjusted right under the coil. This largest one of the tubes also serves as a nest for a set of four pins to adjust to tighter air flow for MTL / loose MTL vaping. Most important, you can switch AFC Tube (and consequently MTL Pin as well) any time, even with full Tank and a build on the Deck. The Tubes not only control air flow right under coil but also serve as adjustable positive pole of the VapeSnail. Normally you screw them in all the way, but they can be adjusted lower if needed for use with certain Boro compatibles other than the Billet Box. The versatility of the VapeSnail is further facilitated by an amazing part which also comes out of the box, the Chamber and Chimney Reducer. When in place, the CnC Reducer forms a restricted chamber and a narrow Chimney (2.5mm) suitable for MTL builds. When removed, the chamber opens up and the diameter of the chimney increases to 4.0mm, ready for open RDL / DL setups. The VapeSnail features its own condensations proofing design, with a custom Plug. The Plug is a custom silicon sealing gasket which helps so that you will have minimum condensations (if any) inside your AIO. Its sealing function is supported by the Absorbent Pad, a small round synthetic wick, easily replaceable, which absorbs any condensations piling up inside the air channel.
Features and Specs
– Air flow tuning via 5 fixed AFC Tubes (pre-installed Pos. Tube with air hole D=4.0mm and alternative AFC Tubes 2/2.5/3/3.5mm) plus 4 MTL Pins (1/1.2/ 1.5mm/1.8mm pinned inside the Pos. Tube with D=4.0mm), all replaceable real time with full tank and rebuilt deck.
– M2.5mm pan head phillips post screws.
– PCTG Tank allowing real time access to Deck.
– 12.6mm post-to-post space, ~8.5mm post-to-post net space, ~8.0mm coil space.
– Max. net coiling height ~6.0mm (C & C Reducer out) / ~5.2mm (C & C Reducer in)
– Chimney inner D ~4.0mm (C & C Reducer out) / ~2.5mm (C & C Reducer in)
– Height 39.60mm [min] / Weight ~34g
Summing Up
The VapeSnail is Atmizone’s new rebuildable atomizer concept for Billet Box and Boro compatible AIOs. With its amazing potential, real time access to deck, real time fixed air flow swap ability, easy refill system, easy rebuilding and complete package overall, the VapeSnail is much more than just another rebuildable, introducing a unique RTA experience to the users of Boro compatible AIOs.
The Release
The VapeSnail is scheduled to go public on Thursday February 20th via atmizoo.com and official Atmizone partners worldwide and it’s destined to leave its trail whatever the Boro compatible AIO it will go in.
VapeSnailはいつ頃
再販されますか？
Hello,
Thank you for your interest in the VapeSnail!
Next batch is already in production, it is expected to be ready for release roughly by early new year, somewhere around end of January 2021.
Pls stay tuned with our social media and official site news section @ atmizoo.com/news for more precise scheduling updates and details about this next drop of the VapeSnail.
As usual, pre-paying is against our policies but you can learn everything first hand prior to public restock if you are a member of our Facebook group https://www.facebook.com/groups/434445727294663
Do you see a time where you sell the Boro for the vapesnail as a single product? Bc if ppl have a vapesnail w/o the Boro could give customers a chance to purchase just the Boro?? Thank you
Thinking ahead Jerry 🙂 We are working on it…
Wow thats all i can say☺️ When i saw the review in youtube and im not even finish watching it both one straight away in the website 😀Very nice design as the other comment said there its all covered MtL, DL,SMTL. Cant wait to get my hands on it!
That looks great and i need one 🙂
How much tank-capacity has the VapeSnail?
Thank you! Capacity is around 4.8ml
What an idea and as far as I am concerned, this is a trendsetter and a big relief from the Boros. Never been a fan of the Boro tanks and its dreadful o-rings.
The concept of dialing in/fine tuning the draw with all these afc inserts/options, this is going to be a gem of a product for the Billet Boxes.
RDL, MTL, all areas have been covered. Indeed, a well thought, well executed concept……
with the quality of previous Atmizoo products, this tank is going to be a game changer……
Just cannot wait to lay my hands on one of them 🙂
well done to the Atmizoo team…..
Thank you sir 🙂 Looking forward to your feedback, as i know you have tried *a lot* of Billet Box stuff.
I’ve been looking forward to the release of the VapeSnail ever since it was revealed. The ability to fine tune my builds without having to empty the tank will be a major bonus.
The VapeShell made my billet box useable on a daily basis and I think the VapeSnail takes it to another level.
Thank you for your sincere interest 🙂 We are looking forward to your feedback after you have the chance to use the VapeSnail.