Add to Wishlist

Roller/Dingo – Internal Switch Assembly (HP Edition)

€27.28

High Performance internal switch assembly for the Roller and Dingo. Lower-maintenance, heat-resistant version suitable for switching higher power.

SKU: RD-HSA

 

Out of stock

SKU: RD-HSA Category:

High performance switch assembly for all versions of the Roller and Dingo.

The HP Switch Assembly is manufactured using PEEK insulators and is suitable for use up to 250C. Compared to the standard version, this durable, heat-resistant switch is suitable for switching higher power with lower maintenance requirements.

The HP switch assembly includes the following components:

The Switch Assembly Includes the following components:

  1. An Internal Switch Housing (HP edition).
  2. A Reinforcement Ring.
  3. A moving Axle (HP edition) with a 4mm Spring.
  4. A silver-plated Contact Rod.
  5. A 2mm Ball-Bearing and 2mm diameter Spring.
  6. A hexagonal, flat-top Battery-side Contact, silver-plated.
  7. A hexagonal Atomizer-side Contact, silver-plated.
  8. An adjustable-height 304 SS Pole Screw with mini o-ring.
  9. A liquid-sealing o-Ring.

The delrin Button Washer is optionally mounted around the button and can be safely removed if you prefer the look of the device without it.

Important

Due to its high temperature tolerance, the HP switch assembly will keep operating even under extreme conditions. Therefore, it is only recommended for use with the Roller/Dingo in combination with either i) a resettable fuse, such as the Bug, or ii) with VV/VW modules that include protection circuitry. Use common sense: Never leave your device unlocked in bags or pockets when using the HP switch assembly.

6 reviews for Roller/Dingo – Internal Switch Assembly (HP Edition)

  1. Erik –

    Got it to replace an old beat up (but perfectly functioning) switch on a used roller I purchased. It shipped out lightning fast (Greece to NY in about a day!). I threw everything I have at it down to .27 and it hits perfectly every time. You will notice a good amount of heat down real low, but she takes it as advertised.

    It took me some time to get used to the locking detent being on the the left (the old switch locked right), but I can now one hand unlock it after some use. It also sits a bit higher but I like it, Its easier to spin. You also get a cool gasket that goes around the switch hole which is also pretty cool. One other thing of note is that all those tiny parts that come with the original switch can be used with it, for when I loose another one of those little ball bearings =D

    Thank you for making this fantastic little mod even better! I’m going to be saving my pennies for a nice brass Lab65 😉

  2. Scott –

    I’ve had a Lab for nearly a year now and probably didn’t need it but bought a new switch just so i can vape and work on the old one at the same time 🙂
    Just wanted to say that the service you get from Atmizoo is second to none, I got my order wrong and they corrected it with excellent communications and no fuss whatsoever. My new switch was dispatched and delivered to the UK within a day or so.
    With Atmizoo you don’t just get A1 quality hardware you get A1 quality service too- I cannot fault you Atmizoo- don’t change anything- you’re the best!
    Best tregards

    Scott

    • Tasos –

      Hey Scott,

      Your comments are very flattering! Keeping vapers happy and treating everyone as we would like to be treated is what we have always intended for 😉

      Always here for anything you might need in the future!

  3. Andy-k –

    Just thought I’d add a quick update to my earlier review on the Roller HP Switch having used it for a while.

    Performance is as expected, without any appreciable drop over time through normal use, or when maintenance has been neglected.
    Builds down to around 0.4ohm at 4.2v have been handled without issue, as have higher resistance builds of around 1ohm running at 8.4v through the use of 18350s in series – these fit nicely without the use of an extension.

  4. Derek –

    I lost some of the pieces for my switch a while back. Havn’t been able to use my beauty. Just ordered a replacement switch so glad I didn’t have to replace the whole unit! You guys rock!

  5. Adriaan –

    Very happy with the upgraded switch!

    I received the switches a while ago but haven’t had the time to drop them in until now. As always the service and craftmanship is second to none when it comes to Atmizoo!

  6. Andy-k –

    Very pleased to see the HP switches are now available for the Roller, adding even more versatility to a mod that easily adapts itself to suit any style of vaping.

    I took delivery of my switch today – a perfect drop in upgrade over the standard switch. Excellent service as always from Atmizone!

    Can’t believe I’ve had my Roller for over a year now! Looking forward to taking advantage of the lower maintenance of the HP switch over the next year with my Roller,

Add a review